Abrasive is a material, often a mineral, that is used to shape or finish a workpiece through rubbing, which leads to part of the workpiece being worn away by friction. While finishing a material often means polishing it to gain a smooth, reflective surface, the process can also involve roughening as in satin, matte or beaded finishes. In short, the ceramics which are used to cut, grind and polish other softer materials are known as abrasives.
Cutting tool or cutter is used to cut, shape, and remove material from a workpiece by means of machining tools as well as shear deformation. There are several different types of single edge cutting tools that are made from a variety of hardened metal alloys that are vary in size as well as alloy composition depending on the size and the type of material being turned. These cutting tools are held stationary by what is known as a tool post which is what manipulates the tools to cut the material into the desired shape.
Machining is a process in which a material (often metal) is cut to a desired final shape and size by a controlled material-removal process. The processes that have this common theme are collectively called subtractive manufacturing, which utilizes machine tools, in contrast to additive manufacturing (3D printing), which uses controlled addition of material.
Material testing is an interdisciplinary field of materials science that covers the discovery of new materials and characteristic, classify particularly solids. The field is also commonly termed materials science and engineering emphasizing engineering aspects of building useful items, and materials physics, which emphasizes the use of physics to describe material properties.
Metrology is defined by the International Bureau of Weights and Measures (BIPM) as "the science of measurement, embracing both experimental and theoretical determinations at any level of uncertainty in any field of science and technology". It establishes a common understanding of units, crucial to human activity. Metrology is a wide reaching field, but can be summarized through three basic activities: the definition of internationally accepted units of measurement, the realisation of these units of measurement in practice, and the application of chains of traceability (linking measurements to reference standards). These concepts apply in different degrees to metrology's three main fields: scientific metrology; applied, technical or industrial metrology, and legal metrology.
Overall maintenance functions can defined as maintenance, repair and overhaul (MRO), and MRO is also used for maintenance, repair and operations. The technical meaning of maintenance involves functional checks, servicing, repairing or replacing of necessary devices, equipment, machinery, building infrastructure, and supporting utilities in industrial, business, and residential installations. Over time, this has come to include multiple wordings that describe various cost-effective practices to keep equipment operational; these activities occur either before or after a failure.
Sawing are commonly used for cutting hard materials. They are used extensively in forestry, construction, demolition, medicine, and hunting. saw is a tool consisting of a tough blade, wire, or chain with a hard toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power source. An abrasive saw has a powered circular blade designed to cut through metal or ceramic.
KANETEC Magnetic Holder Hand Lifma HL-15 menawarkan solusi angkat material berbahan pelat besi dan baja ferrous dengan mekanisme rekat magnetis yang bisa diaktif dan non-aktifkan dengan mudah. KANETEC Magnetic Holder Hand Lifma HL-15 bisa digunakan juga sebagai alat pembersih serpihan potong material ferrous di meja milling maupun sebagai lifter sederhana di bawah air. Bisa pula digunakan sebagai hanger sementara untuk benda yang beratnya kurang dari 20kg.
Sejak 1924, Kanetec Co.,Ltd, mengembangkan, memproduksi dan memasarkan alat-alat kerja magnetis dari Jepang. Saat ini Milwaukee Tool merupakan anak perusahaan dari Techtronic Industries, yang juga memilki merek AEG, Ryobi, Hoover, Dirt Devil, dan Vax. Pastikan kehandalan dan keaslian Milwaukee Tool dengan membelinya di METALEXTRA.COM!
Fitur KANETEC Magnetic Holder Hand Lifma HL-15:
Paling cocok untuk menarik keluar bahan baja atau lembaran baja dan membawa bahan, cetakan logam, tekan mati dan sebagainya.
Daya rekat magnetis: 350 N
Kapasitas angkat: 20 kg
Panjang handle: 49mm
Benda kerja dipegang dan dilepaskan cukup halus alat kerja aplikasi mainenance (MRO)
Gaya magnet dapat dihidupkan dan dimatikan dengan operasi tuas
T-handle kuat dan tetap untuk transportasi benda kerja yang stabil
Harap dicatat: Gambar hanya untuk tujuan representasi. Produk mungkin berbeda dari yang ditunjukkan di atas. Diskon% dibulatkan ke Bilangan bulat terdekat. Untuk informasi lebih lanjut silahkan klik tombol inquiry maupun wishlist.
Dimension of KANETEC Magnetic Holder Hand Lifma HL-15:
Ordering Guide KANETEC Magnetic Holder Hand Lifma HL-15 mm(inch):
Max. Holding Power
2 kN (200kgf)
The holding power is based on a test piece of 15 mm thick soft steel. The holding power and lifting capacity drop
⌀20 round steel bar. ※Do not use this Lifma for a hoist. If you require other solution, please contact us at [email protected]